Adafruit Monochrome 1.3 128x64 OLED graphic display
LCD / Artikelnr: 315922 (1041393)
Produkten har utgått
Denna produkt är inte längre till salu då den har utgått ur sortimentet.
Översikt
The driver chip, SSD1306 can communicate in two ways: I2C or SPI. The OLED itself require a 3.3V power supply and 3.3V logic levels for communication, but we include a 3.3V regulator and all pins are fully level shifted so you can use with 5V devices!
The power requirements depend a little on how much of the display is lit but on average the display uses about 40mA from the 3.3V supply. Built into the OLED driver is a simple switch-cap charge pump that turns 3.3v-5v into a high voltage drive for the OLEDs.
We have a detailed tutorial and example code in the form of an Arduino library for text and graphics. You'll need a microcontroller with more than 1K of RAM since the display must be buffered. The library can print text, bitmaps, pixels, rectangles, circles and lines. It uses 1K of RAM since it needs to buffer the entire display but its very fast! The code is simple to adapt to any other microcontroller.
Recensioner (0)
Denna produkt har ännu inte blivit recenserad!
Frågor & svar (0)
Inga frågor har ännu ställts på denna produkt
Produktinfo
| Release | 2020-03-12 |
| Vårt artikelnr | 315922 |
| Tillverkarens artikelnr |
315922
|
| Tillverkare | Adafruit |